Springboot吞吐量優化解決方案
點擊上方藍色字體，選擇“標星公眾號”
優質文章，第一時間送達
一、異步執行
實現方式二種：
1.使用異步注解@aysnc、啟動類：添加@EnableAsync注解
2.JDK 8本身有一個非常好用的Future類——CompletableFuture
@AllArgsConstructor
public class AskThread implements Runnable{
private CompletableFuture<Integer> re = null;
public void run() {
int myRe = 0;
try {
myRe = re.get() * re.get();
} catch (Exception e) {
e.printStackTrace();
}
System.out.println(myRe);
}
public static void main(String[] args) throws InterruptedException {
final CompletableFuture<Integer> future = new CompletableFuture<>();
new Thread(new AskThread(future)).start();
//模擬長時間的計算過程
Thread.sleep(1000);
//告知完成結果
future.complete(60);
}
}
在該示例中，啟動一個線程，此時AskThread對象還沒有拿到它需要的數據，執行到 myRe = re.get() * re.get()會阻塞。我們用休眠1秒來模擬一個長時間的計算過程，并將計算結果告訴future執行結果，AskThread線程將會繼續執行。
public class Calc {
public static Integer calc(Integer para) {
try {
//模擬一個長時間的執行
Thread.sleep(1000);
} catch (InterruptedException e) {
e.printStackTrace();
}
return para * para;
}
public static void main(String[] args) throws ExecutionException, InterruptedException {
final CompletableFuture<Void> future = CompletableFuture.supplyAsync(() -> calc(50))
.thenApply((i) -> Integer.toString(i))
.thenApply((str) -> "\"" + str + "\"")
.thenAccept(System.out::println);
future.get();
}
}
CompletableFuture.supplyAsync方法構造一個CompletableFuture實例，在supplyAsync()方法中，它會在一個新線程中，執行傳入的參數。在這里它會執行calc()方法，這個方法可能是比較慢的，但這并不影響CompletableFuture實例的構造速度，supplyAsync()會立即返回。而返回的CompletableFuture實例就可以作為這次調用的契約，在將來任何場合，用于獲得最終的計算結果。supplyAsync用于提供返回值的情況，CompletableFuture還有一個不需要返回值的異步調用方法runAsync(Runnable runnable),一般我們在優化Controller時，使用這個方法比較多。這兩個方法如果在不指定線程池的情況下，都是在ForkJoinPool.common線程池中執行，而這個線程池中的所有線程都是Daemon（守護）線程，所以，當主線程結束時，這些線程無論執行完畢都會退出系統。
核心代碼：
CompletableFuture.runAsync(() ->
this.afterBetProcessor(betRequest,betDetailResult,appUser,id)
);
異步調用使用Callable來實現
@RestController
public class HelloController {
private static final Logger logger = LoggerFactory.getLogger(HelloController.class);
@Autowired
private HelloService hello;
@GetMapping("/helloworld")
public String helloWorldController() {
return hello.sayHello();
}
/**
* 異步調用restful
* 當controller返回值是Callable的時候，springmvc就會啟動一個線程將Callable交給TaskExecutor去處理
* 然后DispatcherServlet還有所有的spring攔截器都退出主線程，然后把response保持打開的狀態
* 當Callable執行結束之后，springmvc就會重新啟動分配一個request請求，然后DispatcherServlet就重新
* 調用和處理Callable異步執行的返回結果， 然后返回視圖
*
* @return
*/
@GetMapping("/hello")
public Callable<String> helloController() {
logger.info(Thread.currentThread().getName() + " 進入helloController方法");
Callable<String> callable = new Callable<String>() {
@Override
public String call() throws Exception {
logger.info(Thread.currentThread().getName() + " 進入call方法");
String say = hello.sayHello();
logger.info(Thread.currentThread().getName() + " 從helloService方法返回");
return say;
}
};
logger.info(Thread.currentThread().getName() + " 從helloController方法返回");
return callable;
}
}
異步調用的方式 WebAsyncTask
@RestController
public class HelloController {
private static final Logger logger = LoggerFactory.getLogger(HelloController.class);
@Autowired
private HelloService hello;
/**
* 帶超時時間的異步請求 通過WebAsyncTask自定義客戶端超時間
*
* @return
*/
@GetMapping("/world")
public WebAsyncTask<String> worldController() {
logger.info(Thread.currentThread().getName() + " 進入helloController方法");
// 3s鐘沒返回，則認為超時
WebAsyncTask<String> webAsyncTask = new WebAsyncTask<>(3000, new Callable<String>() {
@Override
public String call() throws Exception {
logger.info(Thread.currentThread().getName() + " 進入call方法");
String say = hello.sayHello();
logger.info(Thread.currentThread().getName() + " 從helloService方法返回");
return say;
}
});
logger.info(Thread.currentThread().getName() + " 從helloController方法返回");
webAsyncTask.onCompletion(new Runnable() {
@Override
public void run() {
logger.info(Thread.currentThread().getName() + " 執行完畢");
}
});
webAsyncTask.onTimeout(new Callable<String>() {
@Override
public String call() throws Exception {
logger.info(Thread.currentThread().getName() + " onTimeout");
// 超時的時候，直接拋異常，讓外層統一處理超時異常
throw new TimeoutException("調用超時");
}
});
return webAsyncTask;
}
/**
* 異步調用，異常處理，詳細的處理流程見MyExceptionHandler類
*
* @return
*/
@GetMapping("/exception")
public WebAsyncTask<String> exceptionController() {
logger.info(Thread.currentThread().getName() + " 進入helloController方法");
Callable<String> callable = new Callable<String>() {
@Override
public String call() throws Exception {
logger.info(Thread.currentThread().getName() + " 進入call方法");
throw new TimeoutException("調用超時!");
}
};
logger.info(Thread.currentThread().getName() + " 從helloController方法返回");
return new WebAsyncTask<>(20000, callable);
}
}
二、增加內嵌Tomcat的最大連接數
@Configuration
public class TomcatConfig {
@Bean
public ConfigurableServletWebServerFactory webServerFactory() {
TomcatServletWebServerFactory tomcatFactory = new TomcatServletWebServerFactory();
tomcatFactory.addConnectorCustomizers(new MyTomcatConnectorCustomizer());
tomcatFactory.setPort(8005);
tomcatFactory.setContextPath("/api-g");
return tomcatFactory;
}
class MyTomcatConnectorCustomizer implements TomcatConnectorCustomizer {
public void customize(Connector connector) {
Http11NioProtocol protocol = (Http11NioProtocol) connector.getProtocolHandler();
//設置最大連接數
protocol.setMaxConnections(20000);
//設置最大線程數
protocol.setMaxThreads(2000);
protocol.setConnectionTimeout(30000);
}
}
}
三、使用@ComponentScan()定位掃包比@SpringBootApplication掃包更快
四、默認tomcat容器改為Undertow（Jboss下的服務器，Tomcat吞吐量5000，Undertow吞吐量8000）
<exclusions>
<exclusion>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-tomcat</artifactId>
</exclusion>
</exclusions>
改為:
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-undertow</artifactId>
</dependency>
五、使用 BufferedWriter 進行緩沖
六、Deferred方式實現異步調用
@RestController
public class AsyncDeferredController {
private final Logger logger = LoggerFactory.getLogger(this.getClass());
private final LongTimeTask taskService;
@Autowired
public AsyncDeferredController(LongTimeTask taskService) {
this.taskService = taskService;
}
@GetMapping("/deferred")
public DeferredResult<String> executeSlowTask() {
logger.info(Thread.currentThread().getName() + "進入executeSlowTask方法");
DeferredResult<String> deferredResult = new DeferredResult<>();
// 調用長時間執行任務
taskService.execute(deferredResult);
// 當長時間任務中使用deferred.setResult("world");這個方法時，會從長時間任務中返回，繼續controller里面的流程
logger.info(Thread.currentThread().getName() + "從executeSlowTask方法返回");
// 超時的回調方法
deferredResult.onTimeout(new Runnable(){
@Override
public void run() {
logger.info(Thread.currentThread().getName() + " onTimeout");
// 返回超時信息
deferredResult.setErrorResult("time out!");
}
});
// 處理完成的回調方法，無論是超時還是處理成功，都會進入這個回調方法
deferredResult.onCompletion(new Runnable(){
@Override
public void run() {
logger.info(Thread.currentThread().getName() + " onCompletion");
}
});
return deferredResult;
}
}
七、異步調用可以使用AsyncHandlerInterceptor進行攔截
@Component
public class MyAsyncHandlerInterceptor implements AsyncHandlerInterceptor {
private static final Logger logger = LoggerFactory.getLogger(MyAsyncHandlerInterceptor.class);
@Override
public boolean preHandle(HttpServletRequest request, HttpServletResponse response, Object handler)
throws Exception {
return true;
}
@Override
public void postHandle(HttpServletRequest request, HttpServletResponse response, Object handler,
ModelAndView modelAndView) throws Exception {
// HandlerMethod handlerMethod = (HandlerMethod) handler;
logger.info(Thread.currentThread().getName()+ "服務調用完成，返回結果給客戶端");
}
@Override
public void afterCompletion(HttpServletRequest request, HttpServletResponse response, Object handler, Exception ex)
throws Exception {
if(null != ex){
System.out.println("發生異常:"+ex.getMessage());
}
}
@Override
public void afterConcurrentHandlingStarted(HttpServletRequest request, HttpServletResponse response, Object handler)
throws Exception {
// 攔截之后，重新寫回數據，將原來的hello world換成如下字符串
String resp = "my name is chhliu!";
response.setContentLength(resp.length());
response.getOutputStream().write(resp.getBytes());
logger.info(Thread.currentThread().getName() + " 進入afterConcurrentHandlingStarted方法");
}
}
————————————————
版權聲明：本文為CSDN博主「灬點點」的原創文章，遵循CC 4.0 BY-SA版權協議，轉載請附上原文出處鏈接及本聲明。
原文鏈接：
https://blog.csdn.net/qq_32447301/article/details/88046026
鋒哥最新SpringCloud分布式電商秒殺課程發布
??????
??長按上方微信二維碼 2 秒
感謝點贊支持下哈 
評論
圖片
表情