手機死機問題分析與舉例
共 28455字，需瀏覽 57分鐘
·
2024-07-31 07:43
和你一起終身學習，這里是程序員Android
本篇文章主要介紹 Android 開發中的部分知識點，通過閱讀本篇文章，您將收獲以下內容:
一、死機系統簡圖
二、死機的可能原因
三、死機問題需要分析哪些數據
四 、Java Backtrace 分析
五、常見 Java backtrace 舉例
六、Native Backtrace
七、Kernel Backtrace
八、幾種典型的異常情況
一、死機系統簡圖
當用戶對手機進行操作時, 對應的數據流將是下面一個概括的流程圖.
HW 如傳感器, 觸摸屏(TP), 物理按鍵(KP)等感知到用戶操作后，觸發相關的中斷(ISR) 傳遞給Kernel, Kernel 相關的driver 對這些ISR 進行處理后，轉化成標準的InputEvent.
User Space 的System Server 中的Input System 則持續監聽Kernel 傳遞上來的原始InputEvent, 對其進行進一步的處理后, 變成上層APP 可直接處理的Input Event, 如button 點擊, 長按, 滑動等等.
APP 對相關的事件進行處理后，請求更新相關的邏輯界面，而這個則由System Server 中的WMS 等來負責.
相關的邏輯界面更新后(Z-Window), 則會請求SurfaceFlinger 來產生FrameBuffer 數據, SurfaceFlinger 則會利用GPU 等來計算生成.
Display System/Driver 則會將FrameBuffer 中的數據更新顯示出來, 這樣用戶才能感知到他的操作行為.
二、死機的可能原因
原則上上面流程中，每一步出現問題，都可能引發死機問題. 大的方面講，可以分成 硬件HW 和 軟件SW 兩個層次, 硬件HW 不在我們的講訴之內.
1.軟件SW 上，死機的原因可以分成兩種:
邏輯行為異常
邏輯判斷錯誤
邏輯設計錯誤
邏輯卡頓(block)
死循環 (Deadloop)
死鎖 (Deadlock)
2.從具體的原因上將，可以進一步分成:
(1). Input Driver
無法接收HW 的中ISR，產生原始的InputEvent, 或者產生的InputEvent 異常.
(2). Input System
無法監聽Kernel 傳遞上來的原始InputEvent, 或者轉換與傳遞異常.
(3). System Logic
無法正常響應Input System 傳遞過來的InputEvent, 或者響應出錯.
(4). WMS/Surfaceflinger 行為異常
WMS/SF 無法正確的對Z-Window 進行疊加轉換
(5). Display System3
無法更新Framebuffer 數據，或者填充的數據錯誤
(6). LCM Driver
無法將Framebuffer 數據顯示在LCM 上
(7). CPU Scheduler/File System/Memory Manager 等Kernel 支撐性模塊.
系統支撐性模塊無法正常, 導致整個流程都沒法正常進行, 如CPU Scheduler 無法正常執行,導致thread 都無法被調度, memory 耗盡導致系統無法快速申請到memory, file system 卡住導致無法進行讀寫操作等.
3. 對應硬件HW hang, 經常見得的情況有:
Power 異常
Clock/26M/32K 失效
CPU Core 無法啟動, 執行異常等.
Memory & Memory Controller.
Fail IC.
三、死機問題需要分析哪些數據
1. 死機分析數據
俗話說, 巧婦難為無米之炊, 死機分析, 同樣需要獲取第一手的資料, 方可分析問題. 那么哪些數據可以用來分析死機呢。
大概的講，可以分成空間數據和時間數據?？臻g數據，即當時現場環境，如有哪些process 在運行，CPU 的執行情況，memory 的利用情況，以及具體的process 的memory 數據等。時間數據，即行為上的連續數據，比如某個Process 在一段時間內執行了哪些操作，某段時間內CPU 利用率的變化等。通常時空都是交融的，對應我們抓取資訊時往往也是。
2. 哪些數據可以用來分析.
Backtrace
Backtrace 又分成Java backtrace, Native Backtrace, Kernel Backtrace. 它是分析死機的非常重要的手段，我們可以快速的知道，對應的process/thread 在當時正在執行哪些動作，卡住哪里等。可以非常直觀的分析死機現場。
另外還有一類trace 為ftrace/systrace, 除非特別開啟, 以及在特定的流程點上添加, 這類trace 往往不是很詳盡, 但也具有比較好的參考作用.
系統運行環境
客觀的反應系統的執行環境，通常包括如CPU 利用率，Memory 使用情況， Storage 剩余情況等。這些資料也非常重要，比如可以快速的知道，當時是否有Process 在瘋狂的執行，當時是不是處于嚴重的low memory 情況， Storage 是否有耗盡的情況發生等。
程序執行環境
客觀的反應當時某個程序(Kernel 也可以看成一個程序)的執行現場, 此類資訊通常包括如process 的coredump, java heap prof, kernel 的memory dump 等。完整的執行環境，我們可以快速的知道當時具體的變量的值，寄存器值等，可以精細的分析問題。
其他的一些資訊
這些資訊相對來說，比較零散了，如通常的LOG, 一些debug 命令的結果, JTAG & CVD 的數據等。
四 、Backtrace 分析
1. Java Backtrace
從Java Backtrace, 我們可以知道當時Process 的虛擬機執行狀態. Java Backtrace 依靠SignalCatcher 來抓取.
Google default: SignalCatcher catchs SIGQUIT(3), and then print the java backtrace to /data/anr/trace.txt
MTK Enhance: SignalCatcher catchs SIGSTKFLT(16), and then print the java backtrace to /data/anr/mtktrace.txt( 僅僅 Android ICS 4.0 <-> Android M 6.0版本)
You can update system properties dalvik.vm.stack-trace-file to Change the address, default is /data/anr/traces.txt
1.1 抓取的方式
在ENG Build 中
adb remount
adb shell chmod 0777 data/anr
adb shell kill -3 pid
adb pull /data/anr
在User Build 中
沒有root 權限的情況下，只能直接pull 已經存在的backtrace.
adb pull /data/anr
你可以嘗試直接使用下面的腳本一次性抓取
adb remount
adb shell chmod 0777 data/anr
adb shell ps
@echo off
set processid=
set /p processid=Please Input process id:
@echo on
adb shell kill -3 %processid%
@echo off
ping -n 8 127.0.0.1>nul
@echo on
adb pull data/anr/traces.txt trace-%processid%.txt
pause
1.2 JavaBacktrace 解析
Android 比較新的版本的java backtrace, 除了直接的thread backtrace 之外, 同時也會把ART 的一些基本狀態也打印出來, 比較方便觀察ART 的基本狀態, 比如:
----- pid 1051 at 2018-09-29 23:23:52 -----
Cmd line: system_server
Build fingerprint: 'XXXXX/A73/A73:8.1.0/O11019/1537977601:user/release-keys'
ABI: 'arm64'
Build type: optimized
Zygote loaded classes=5413 post zygote classes=6049
Intern table: 61702 strong; 12632 weak
JNI: CheckJNI is off; globals=10050 (plus 1015 weak)
Libraries: /system/lib64/libandroid.so /system/lib64/libandroid_servers.so /system/lib64/libcompiler_rt.so /system/lib64/libdcfdecoderjni.so /system/lib64/libjavacrypto.so /system/lib64/libjnigraphics.so /system/lib64/libmedia_jni.so /system/lib64/libmediatek_exceptionlog.so /system/lib64/libperfframeinfo_jni.so /system/lib64/librutils.so /system/lib64/libsoundpool.so /system/lib64/libwebviewchromium_loader.so /system/lib64/libwifi-service.so /vendor/lib64/libnativecheck-jni.so libjavacore.so libopenjdk.so (17)
Heap: 9% free, 80MB/89MB; 1893251 objects
Dumping cumulative Gc timings
Start Dumping histograms for 12601 iterations for concurrent copying
ProcessMarkStack: Sum: 3760.617s 99% C.I. 35.990ms-1218.784ms Avg: 298.438ms Max: 14617.568ms
ScanImmuneSpaces: Sum: 216.241s 99% C.I. 2.719ms-110.340ms Avg: 17.160ms Max: 1644.161ms
FlipOtherThreads: Sum: 136.969s 99% C.I. 0.517ms-174.411ms Avg: 10.869ms Max: 5585.050ms
VisitConcurrentRoots: Sum: 119.937s 99% C.I. 1.928ms-50.934ms Avg: 9.518ms Max: 1356.509ms
ClearFromSpace: Sum: 66.775s 99% C.I. 0.168ms-21.473ms Avg: 5.299ms Max: 118.068ms
SweepSystemWeaks: Sum: 58.215s 99% C.I. 0.196ms-19.387ms Avg: 4.619ms Max: 342.553ms
GrayAllDirtyImmuneObjects: Sum: 57.570s 99% C.I. 0.133ms-123.041ms Avg: 4.568ms Max: 2010.547ms
ForwardSoftReferences: Sum: 37.474s 99% C.I. 0.037ms-13.834ms Avg: 2.973ms Max: 118.213ms
EnqueueFinalizerReferences: Sum: 30.905s 99% C.I. 0.094ms-22.239ms Avg: 2.452ms Max: 248.969ms
MarkingPhase: Sum: 24.277s 99% C.I. 0.257ms-51.155ms Avg: 1.926ms Max: 3743.053ms
VisitNonThreadRoots: Sum: 23.507s 99% C.I. 0.065ms-15.260ms Avg: 1.865ms Max: 190.694ms
ProcessReferences: Sum: 17.221s 99% C.I. 9.019us-4689.544us Avg: 683.321us Max: 94215us
EmptyRBMarkBitStack: Sum: 15.343s 99% C.I. 0.026ms-13.119ms Avg: 1.217ms Max: 145.672ms
ThreadListFlip: Sum: 10.730s 99% C.I. 128.387us-25549.046us Avg: 851.524us Max: 1555533us
InitializePhase: Sum: 7.689s 99% C.I. 125us-9536.627us Avg: 610.256us Max: 434902us
FlipThreadRoots: Sum: 4.346s 99% C.I. 16.387us-13773.217us Avg: 344.930us Max: 241943us
RecordFree: Sum: 4.106s 99% C.I. 95us-2474.875us Avg: 325.895us Max: 31656us
SweepAllocSpace: Sum: 2.746s 99% C.I. 32.035us-6375.082us Avg: 217.946us Max: 397272us
SweepLargeObjects: Sum: 2.611s 99% C.I. 10us-1976.352us Avg: 207.248us Max: 36205us
ResumeOtherThreads: Sum: 2.453s 99% C.I. 8.115us-8079.599us Avg: 194.712us Max: 86018us
ReclaimPhase: Sum: 2.086s 99% C.I. 9us-4266.285us Avg: 165.567us Max: 155093us
ResumeRunnableThreads: Sum: 1.759s 99% C.I. 8.063us-2676.218us Avg: 139.607us Max: 87029us
MarkStackAsLive: Sum: 782.752ms 99% C.I. 5us-799.362us Avg: 62.118us Max: 41297us
MarkZygoteLargeObjects: Sum: 741.028ms 99% C.I. 12us-899.899us Avg: 58.807us Max: 24679us
(Paused)GrayAllNewlyDirtyImmuneObjects: Sum: 651.153ms 99% C.I. 12us-373.754us Avg: 51.674us Max: 14328us
ClearRegionSpaceCards: Sum: 412.842ms 99% C.I. 8us-199.633us Avg: 32.762us Max: 16297us
(Paused)SetFromSpace: Sum: 357.553ms 99% C.I. 3us-286.340us Avg: 28.374us Max: 14500us
SwapBitmaps: Sum: 151.902ms 99% C.I. 4us-99.729us Avg: 12.054us Max: 5447us
Sweep: Sum: 110.635ms 99% C.I. 2us-49.924us Avg: 8.779us Max: 1087us
(Paused)FlipCallback: Sum: 105.455ms 99% C.I. 2us-99.800us Avg: 8.368us Max: 8433us
(Paused)ClearCards: Sum: 89.377ms 99% C.I. 1000ns-199016ns Avg: 295ns Max: 17545000ns
UnBindBitmaps: Sum: 17.838ms 99% C.I. 0.250us-49.765us Avg: 1.415us Max: 1516us
Done Dumping histograms
concurrent copying paused: Sum: 10.999s 99% C.I. 320.432us-63766.026us Avg: 872.888us Max: 1214342us
concurrent copying total time: 4607.007s mean time: 365.606ms
concurrent copying freed: 4075114399 objects with total size 152GB
concurrent copying throughput: 884547/s / 33MB/s
Cumulative bytes moved 115136403208
Cumulative objects moved 2160415247
Total time spent in GC: 4607.007s
Mean GC size throughput: 32MB/s
Mean GC object throughput: 884504 objects/s
Total number of allocations 4076810306
Total bytes allocated 145GB
Total bytes freed 145GB
Free memory 8MB
Free memory until GC 8MB
Free memory until OOME 431MB
Total memory 89MB
Max memory 512MB
Zygote space size 652KB
Total mutator paused time: 10.999s
Total time waiting for GC to complete: 71.458s
Total GC count: 12601
Total GC time: 4607.007s
Total blocking GC count: 3305
Total blocking GC time: 1302.402s
Histogram of GC count per 10000 ms: 0:11034,1:7128,2:1807,3:417,4:87,5:21,6:6,7:3,8:2,9:2,11:2,12:2,17:1
Histogram of blocking GC count per 10000 ms: 0:17706,1:2336,2:443,3:26,4:1
Registered native bytes allocated: 57354982
/system/framework/oat/arm64/com.android.location.provider.odex: speed
/system/priv-app/FusedLocation/oat/arm64/FusedLocation.odex: speed
/system/priv-app/Telecom/oat/arm64/Telecom.odex: speed
/system/framework/oat/arm64/mediatek-framework-net.odex: quicken
/system/framework/oat/arm64/mediatek-framework-net.odex: quicken
/system/framework/oat/arm64/mediatek-framework-net.odex: quicken
/system/framework/oat/arm64/mediatek-framework-net.odex: quicken
/system/framework/oat/arm64/com.coloros.statistics.odex: quicken
/system/priv-app/SettingsProvider/oat/arm64/SettingsProvider.odex: speed
/system/framework/oat/arm64/services.odex: speed
/system/framework/oat/arm64/ethernet-service.odex: speed
/system/framework/oat/arm64/wifi-service.odex: speed
/system/framework/oat/arm64/com.android.location.provider.odex: speed
/system/framework/oat/arm64/mediatek-services.odex: quicken
/system/framework/oat/arm64/mediatek-framework-net.odex: quicken
/system/framework/oat/arm64/mediatek-framework-net.odex: quicken
/system/framework/oat/arm64/mediatek-framework-net.odex: quicken
/system/framework/oat/arm64/mediatek-framework-net.odex: quicken
/data/dalvik-cache/arm64/vendor@app@LPPeService@LPPeService.apk@classes.dex: quicken
/system/framework/oat/arm64/mediatek-framework-net.odex: quicken
/data/dalvik-cache/arm64/vendor@app@NlpService@NlpService.apk@classes.dex: quicken
Running non JIT
對于死機情況來說, 我們比較關注java heap 的memory 使用與GC 情況:
Heap: 9% free, 80MB/89MB; 1893251 objects
Free memory 8MB
Free memory until GC 8MB
Free memory until OOME 431MB
Total memory 89MB
Max memory 512MB
==》 可以簡單知道是否有java 層的object leaks, 以及觸發GC 的情況
除去這些之后, 我們?cè)賮砜磈ava backtrace 的具體資訊.
下面是一小段system server 的java backtrace 的開始
----- pid 682 at 2014-07-30 18:04:53 -----
Cmd line: system_server
JNI: CheckJNI is off; workarounds are off; pins=4; globals=1484 (plus 50 weak)
DALVIK THREADS:
(mutexes: tll=0 tsl=0 tscl=0 ghl=0) <== 只有老版本有.
"main" prio=5 tid=1 NATIVE
| group="main" sCount=1 dsCount=0 obj=0x4193fde0 self=0x418538f8
| sysTid=682 nice=-2 sched=0/0 cgrp=apps handle=1074835940
| state=S schedstat=( 47858718206 26265263191 44902 ) utm=4074 stm=711 core=0
at android.os.MessageQueue.nativePollOnce(Native Method)
at android.os.MessageQueue.next(MessageQueue.java:138)
at android.os.Looper.loop(Looper.java:150)
at com.android.server.ServerThread.initAndLoop(SystemServer.java:1468)
at com.android.server.SystemServer.main(SystemServer.java:1563)
at java.lang.reflect.Method.invokeNative(Native Method)
at java.lang.reflect.Method.invoke(Method.java:515)
at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:829)
at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:645)
at dalvik.system.NativeStart.main(Native Method)
我們一行一行來解析.
0# 最開始是 -----PID at Time 然后接著 Cmd line: process name
1# the backtrace header: dvm thread ：“DALVIK THREADS:”
新版本中有包括 thread 量, 如: "DALVIK THREADS (214):" 可以觀察到是否有java thread leaks.2# Global DVM mutex value: if 0 unlock, else lock
tll: threadListLock,
tsl: threadSuspendLock,
tscl: threadSuspendCountLock
ghl: gcHeapLock
(mutexes: tll=0 tsl=0 tscl=0 ghl=0)
3# thread name, java thread Priority, [daemon], DVM thread id, DVM thread status.
"main" -> main thread -> activity thread
prio -> java thread priority default is 5, (nice =0, linux thread priority 120), domain is [1,10]
DVM thread id, NOT linux thread id
DVM thread Status:
ZOMBIE, RUNNABLE, TIMED_WAIT, MONITOR, WAIT, INITALIZING,STARTING, NATIVE, VMWAIT, SUSPENDED,UNKNOWN
"main" prio=5 tid=1 NATIVE
4# DVM thread status
group: default is “main”
Compiler,JDWP,Signal Catcher,GC,FinalizerWatchdogDaemon,FinalizerDaemon,ReferenceQueueDaemon are system group
sCount: thread suspend count
dsCount: thread dbg suspend count
obj: thread obj address
Sef: thread point address
group="main" sCount=1 dsCount=0 obj=0x4193fde0 self=0x418538f8
5 Linux thread status
sysTId: linux thread tid
Nice: linux thread nice value
sched: cgroup policy/gourp id
cgrp: c group
handle: handle address
sysTid=682 nice=-2 sched=0/0 cgrp=apps handle=1074835940
6 CPU Sched stat
Schedstat (Run CPU Clock/ns, Wait CPU Clock/ns, Slice times)
utm: utime, user space time(jiffies)
stm: stime, kernel space time(jiffies)
Core now running in cpu.
state=S schedstat=( 47858718206 26265263191 44902 ) utm=4074 stm=711 core=0
五、常見 Java backtrace 舉例
1.ActivityThread 正常狀態/ActivityThread Normal Case
Message Queue is empty, and thread wait for next message.
"main" prio=5 tid=1 NATIVE
| group="main" sCount=1 dsCount=0 obj=0x4193fde0 self=0x418538f8
| sysTid=11559 nice=0 sched=0/0 cgrp=apps/bg_non_interactive handle=1074835940
| state=S schedstat=( 2397315020 9177261498 7975 ) utm=100 stm=139 core=1
at android.os.MessageQueue.nativePollOnce(Native Method)
at android.os.MessageQueue.next(MessageQueue.java:138)
at android.os.Looper.loop(Looper.java:150)
at android.app.ActivityThread.main(ActivityThread.java:5299)
at java.lang.reflect.Method.invokeNative(Native Method)
at java.lang.reflect.Method.invoke(Method.java:515)
at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:829)
at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:645)
at dalvik.system.NativeStart.main(Native Method)
2.Java Backtrace Monitor case
Synchronized Lock：等待同步鎖時的backtrace.
"AnrMonitorThread" prio=5 tid=24 MONITOR
| group="main" sCount=1 dsCount=0 obj=0x41fd80c8 self=0x551ac808
| sysTid=711 nice=0 sched=0/0 cgrp=apps handle=1356369328
| state=S schedstat=( 8265377638 4744771625 6892 ) utm=160 stm=666 core=0
at com.android.server.am.ANRManager$AnrDumpMgr.dumpAnrDebugInfoLocked(SourceFile:~832)
- waiting to lock <0x42838968> (a com.android.server.am.ANRManager$AnrDumpRecord) held by tid=20 (ActivityManager)
at com.android.server.am.ANRManager$AnrDumpMgr.dumpAnrDebugInfo(SourceFile:824)
at com.android.server.am.ANRManager$AnrMonitorHandler.handleMessage(SourceFile:220)
at android.os.Handler.dispatchMessage(Handler.java:110)
at android.os.Looper.loop(Looper.java:193)
at android.os.HandlerThread.run(HandlerThread.java:61)
3.執行JNI code 未返回，狀態是native 的情況
"WifiP2pService" prio=5 tid=37 NATIVE
| group="main" sCount=1 dsCount=0 obj=0x427a9910 self=0x55f088d8
| sysTid=734 nice=0 sched=0/0 cgrp=apps handle=1443230288
| state=S schedstat=( 91121772 135245305 170 ) utm=7 stm=2 core=1
#00 pc 00032700 /system/lib/libc.so (epoll_wait+12)
#01 pc 000105e3 /system/lib/libutils.so (android::Looper::pollInner(int)+94)
#02 pc 00010811 /system/lib/libutils.so (android::Looper::pollOnce(int, int*, int*, void**)+92)
#03 pc 0006c96d /system/lib/libandroid_runtime.so (android::NativeMessageQueue::pollOnce(_JNIEnv*, int)+22)
#04 pc 0001eacc /system/lib/libdvm.so (dvmPlatformInvoke+112)
#05 pc 0004fed9 /system/lib/libdvm.so (dvmCallJNIMethod(unsigned int const*, JValue*, Method const*, Thread*)+484)
#06 pc 00027ea8 /system/lib/libdvm.so
#07 pc 0002f4b0 /system/lib/libdvm.so (dvmMterpStd(Thread*)+76)
#08 pc 0002c994 /system/lib/libdvm.so (dvmInterpret(Thread*, Method const*, JValue*)+188)
#09 pc 000632a5 /system/lib/libdvm.so (dvmCallMethodV(Thread*, Method const*, Object*, bool, JValue*, std::__va_list)+340)
#10 pc 000632c9 /system/lib/libdvm.so (dvmCallMethod(Thread*, Method const*, Object*, JValue*, ...)+20)
#11 pc 00057961 /system/lib/libdvm.so
#12 pc 0000dd40 /system/lib/libc.so (__thread_entry+72)
at android.os.MessageQueue.nativePollOnce(Native Method)
at android.os.MessageQueue.next(MessageQueue.java:138)
at android.os.Looper.loop(Looper.java:150)
at android.os.HandlerThread.run(HandlerThread.java:61)
4. 執行object.wait 等待狀態
"AsyncTask #1" prio=5 tid=33 WAIT
| group="main" sCount=1 dsCount=0 obj=0x427a8480 self=0x56036b40
| sysTid=733 nice=10 sched=0/0 cgrp=apps/bg_non_interactive handle=1443076000
| state=S schedstat=( 1941480839 10140523154 4229 ) utm=119 stm=75 core=0
at java.lang.Object.wait(Native Method)
- waiting on <0x427a8618> (a java.lang.VMThread) held by tid=33 (AsyncTask #1)
at java.lang.Thread.parkFor(Thread.java:1212)
at sun.misc.Unsafe.park(Unsafe.java:325)
at java.util.concurrent.locks.LockSupport.park(LockSupport.java:157)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:2017)
at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:410)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1035)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1097)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:587)
at java.lang.Thread.run(Thread.java:848)
5. Suspend 狀態，通常表明是抓取backtrace 時，當時還正在執行java code, 被強制suspend 的情況
"FileObserver" prio=5 tid=23 SUSPENDED
| group="main" sCount=1 dsCount=0 obj=0x41fd1dc8 self=0x551abda0
| sysTid=710 nice=0 sched=0/0 cgrp=apps handle=1427817920
| state=S schedstat=( 130152222 399783851 383 ) utm=9 stm=4 core=0
#00 pc 000329f8 /system/lib/libc.so (__futex_syscall3+8)
#01 pc 000108cc /system/lib/libc.so (__pthread_cond_timedwait_relative+48)
#02 pc 0001092c /system/lib/libc.so (__pthread_cond_timedwait+64)
#03 pc 00055a93 /system/lib/libdvm.so
#04 pc 0005614d /system/lib/libdvm.so (dvmChangeStatus(Thread*, ThreadStatus)+34)
#05 pc 0004ae7f /system/lib/libdvm.so
#06 pc 0004e353 /system/lib/libdvm.so
#07 pc 000518d5 /system/lib/libandroid_runtime.so
#08 pc 0008af9f /system/lib/libandroid_runtime.so
#09 pc 0001eacc /system/lib/libdvm.so (dvmPlatformInvoke+112)
#10 pc 0004fed9 /system/lib/libdvm.so (dvmCallJNIMethod(unsigned int const*, JValue*, Method const*, Thread*)+484)
#11 pc 00027ea8 /system/lib/libdvm.so
#12 pc 0002f4b0 /system/lib/libdvm.so (dvmMterpStd(Thread*)+76)
#13 pc 0002c994 /system/lib/libdvm.so (dvmInterpret(Thread*, Method const*, JValue*)+188)
#14 pc 000632a5 /system/lib/libdvm.so (dvmCallMethodV(Thread*, Method const*, Object*, bool, JValue*, std::__va_list)+340)
#15 pc 000632c9 /system/lib/libdvm.so (dvmCallMethod(Thread*, Method const*, Object*, JValue*, ...)+20)
#16 pc 00057961 /system/lib/libdvm.so
#17 pc 0000dd40 /system/lib/libc.so (__thread_entry+72)
at android.os.FileObserver$ObserverThread.observe(Native Method)
at android.os.FileObserver$ObserverThread.run(FileObserver.java:88)
六、Native Backtrace
1. Native Backtrace 抓取方式
1.利用debuggerd 抓取
MTK 已經制作了一個利用debuggerd 抓取Native backtrace 的tool RTT(Runtime Trace), 對應的執行命令是:
rtt built timestamp (Apr 18 2014 15:36:21)
USAGE : rtt [-h] -f function -p pid [-t tid]
-f funcion : current support functions:
bt (Backtrace function)
-p pid : pid to trace
-t tid : tid to trace
-n name : process name to trace
-h : help menu
這個rtt 目前只有在eng/userdebug 中可以使用; 另外大家可以使用 google 默認的debuggerd 來抓取:
adb shell debuggerd -b pid
注意的是這些都是要依賴debuggerd 的流程正常, 以及對應抓取process 的debuggerd_signal_handler 行為正常, 否則抓取不到.
2. 添加代碼直接抓取
Google 默認提供了CallStack API, 請參考
system/core/include/libutils/CallStack.h
system/core/libutils/CallStack.cpp
可快速打印單個線程的backtrace.
2.解析Native Backtrace
你可以使用GDB, 或者addr2line 等 tool 來解析抓回的Native Backtrace, 從而知道當時正在執行的native 代碼.
如addr2line 執行
arm-linux-androideabi-addr2line -f -C -e symbols address
七、Kernel Backtrace
1.Kernel Backtrace 抓取方式
1 運行時抓取
AEE/RTT 工具
Proc System
cat proc/pid/task/tid/stack
Sysrq-trigger
adb shell cat proc/kmsg > kmsg.txt
adb shell "echo 8 > proc/sys/kernel/printk“ //修改printk loglevel
adb shell "echo t > /proc/sysrq-trigger“ //打印所有的backtrace
adb shell "echo w > /proc/sysrq-trigger“//打印'-D' status 'D' 的 process
KDB
Long press volume UP and DOWN more then 10s
btp <pid>
Display stack for process <pid>
bta [DRSTCZEUIMA]
Display stack all processes
btc
Backtrace current process on each cpu
btt <vaddr>
Backtrace process given its struct task add
2.添加代碼直接抓取
#include <linux/sched.h>
當前thread: dump_stack();
其他thread: show_stack(task, NULL);
3. Process/Thread 狀態
"R (running)", /* 0 /
"S (sleeping)", / 1 /
"D (disk sleep)", / 2 /
"T (stopped)", / 4 /
"t (tracing stop)", / 8 /
"Z (zombie)", / 16 /
"X (dead)", / 32 /
"x (dead)", / 64 /
"K (wakekill)", / 128 /
"W (waking)", / 256 */
通常一般的Process 處于的狀態都是S (sleeping), 而如果一旦發現處于如D (disk sleep), T (stopped), Z (zombie) 等就要認真審查.
八、幾種典型的異常情況
1. Deadlock
下面這個case 可以看到PowerManagerService, ActivityManager, WindowManager 相互之間發生deadlock.
"PowerManagerService" prio=5 tid=25 MONITOR
| group="main" sCount=1 dsCount=0 obj=0x42bae270 self=0x6525d5c0
| sysTid=913 nice=0 sched=0/0 cgrp=apps handle=1696964440
| state=S schedstat=( 5088939411 10237027338 34016 ) utm=232 stm=276 core=2
at com.android.server.am.ActivityManagerService.bindService(ActivityManagerService.java:~14079)
- waiting to lock <0x42aa0f78> (a com.android.server.am.ActivityManagerService) held by tid=16 (ActivityManager)
at android.app.ContextImpl.bindServiceCommon(ContextImpl.java:1665)
at android.app.ContextImpl.bindService(ContextImpl.java:1648)
at com.android.server.power.PowerManagerService.bindSmartStandByService(PowerManagerService.java:4090)
at com.android.server.power.PowerManagerService.handleSmartStandBySettingChangedLocked(PowerManagerService.java:4144)
at com.android.server.power.PowerManagerService.access$5600(PowerManagerService.java:102)
at com.android.server.power.PowerManagerService$SmartStandBySettingObserver.onChange(PowerManagerService.java:4132)
at android.database.ContentObserver$NotificationRunnable.run(ContentObserver.java:181)
at android.os.Handler.handleCallback(Handler.java:809)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loop(Looper.java:139)
at android.os.HandlerThread.run(HandlerThread.java:58)
"ActivityManager" prio=5 tid=16 MONITOR
| group="main" sCount=1 dsCount=0 obj=0x42aa0d08 self=0x649166b0
| sysTid=902 nice=-2 sched=0/0 cgrp=apps handle=1687251744
| state=S schedstat=( 39360881460 25703061063 69675 ) utm=1544 stm=2392 core=2
at com.android.server.wm.WindowManagerService.setAppVisibility(WindowManagerService.java:~4783)
- waiting to lock <0x42d17590> (a java.util.HashMap) held by tid=12 (WindowManager)
at com.android.server.am.ActivityStack.stopActivityLocked(ActivityStack.java:2432)
at com.android.server.am.ActivityStackSupervisor.activityIdleInternalLocked(ActivityStackSupervisor.java:2103)
at com.android.server.am.ActivityStackSupervisor$ActivityStackSupervisorHandler.activityIdleInternal(ActivityStackSupervisor.java:2914)
at com.android.server.am.ActivityStackSupervisor$ActivityStackSupervisorHandler.handleMessage(ActivityStackSupervisor.java:2921)
at android.os.Handler.dispatchMessage(Handler.java:110)
at android.os.Looper.loop(Looper.java:147)
at com.android.server.am.ActivityManagerService$AThread.run(ActivityManagerService.java:2112)
"WindowManager" prio=5 tid=12 MONITOR
| group="main" sCount=1 dsCount=0 obj=0x42a92550 self=0x6491dd48
| sysTid=898 nice=-4 sched=0/0 cgrp=apps handle=1687201104
| state=S schedstat=( 60734070955 41987172579 219755 ) utm=4659 stm=1414 core=1
at com.android.server.power.PowerManagerService.setScreenBrightnessOverrideFromWindowManagerInternal(PowerManagerService.java:~3207)
- waiting to lock <0x42a95140> (a java.lang.Object) held by tid=25 (PowerManagerService)
at com.android.server.power.PowerManagerService.setScreenBrightnessOverrideFromWindowManager(PowerManagerService.java:3196)
at com.android.server.wm.WindowManagerService.performLayoutAndPlaceSurfacesLockedInner(WindowManagerService.java:9686)
at com.android.server.wm.WindowManagerService.performLayoutAndPlaceSurfacesLockedLoop(WindowManagerService.java:8923)
at com.android.server.wm.WindowManagerService.performLayoutAndPlaceSurfacesLocked(WindowManagerService.java:8879)
at com.android.server.wm.WindowManagerService.access$500(WindowManagerService.java:170)
at com.android.server.wm.WindowManagerService$H.handleMessage(WindowManagerService.java:7795)
at android.os.Handler.dispatchMessage(Handler.java:110)
at android.os.Looper.loop(Looper.java:147)
at android.os.HandlerThread.run(HandlerThread.java:58)
2. 執行JNI native code 后一去不復返
"main" prio=5 tid=1 NATIVE
| group="main" sCount=1 dsCount=0 obj=0x41bb3d98 self=0x41ba2878
| sysTid=814 nice=-2 sched=0/0 cgrp=apps handle=1074389380
| state=D schedstat=( 22048890928 19526803112 32612 ) utm=1670 stm=534 core=0
(native backtrace unavailable)
at android.hardware.SystemSensorManager$BaseEventQueue.nativeDisableSensor(Native Method)
at android.hardware.SystemSensorManager$BaseEventQueue.disableSensor(SystemSensorManager.java:399)
at android.hardware.SystemSensorManager$BaseEventQueue.removeAllSensors(SystemSensorManager.java:325)
at android.hardware.SystemSensorManager.unregisterListenerImpl(SystemSensorManager.java:194)
at android.hardware.SensorManager.unregisterListener(SensorManager.java:560)
at com.android.internal.policy.impl.WindowOrientationListener.disable(WindowOrientationListener.java:139)
at com.android.internal.policy.impl.PhoneWindowManager.updateOrientationListenerLp(PhoneWindowManager.java:774)
at com.android.internal.policy.impl.PhoneWindowManager.screenTurnedOff(PhoneWindowManager.java:4897)
at com.android.server.power.Notifier.sendGoToSleepBroadcast(Notifier.java:518)
at com.android.server.power.Notifier.sendNextBroadcast(Notifier.java:434)
at com.android.server.power.Notifier.access$500(Notifier.java:63)
at com.android.server.power.Notifier$NotifierHandler.handleMessage(Notifier.java:584)
at android.os.Handler.dispatchMessage(Handler.java:110)
at android.os.Looper.loop(Looper.java:193)
at com.android.server.ServerThread.initAndLoop(SystemServer.java:1436)
at com.android.server.SystemServer.main(SystemServer.java:1531)
at java.lang.reflect.Method.invokeNative(Native Method)
at java.lang.reflect.Method.invoke(Method.java:515)
at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:824)
at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:640)
at dalvik.system.NativeStart.main(Native Method)
===>
KERNEL SPACE BACKTRACE, sysTid=814
[<ffffffff>] 0xffffffff from [<c07e5140>] __schedule+0x3fc/0x950
[<c07e4d50>] __schedule+0xc/0x950 from [<c07e57e4>] schedule+0x40/0x80
[<c07e57b0>] schedule+0xc/0x80 from [<c07e5ae4>] schedule_preempt_disabled+0x20/0x2c
[<c07e5ad0>] schedule_preempt_disabled+0xc/0x2c from [<c07e3c3c>] mutex_lock_nested+0x1b8/0x560
[<c07e3a90>] mutex_lock_nested+0xc/0x560 from [<c05667d8>] gsensor_operate+0x1bc/0x2c0
[<c0566628>] gsensor_operate+0xc/0x2c0 from [<c0495fa0>] hwmsen_enable+0xa8/0x30c
[<c0495f04>] hwmsen_enable+0xc/0x30c from [<c0496500>] hwmsen_unlocked_ioctl+0x2fc/0x528
[<c0496210>] hwmsen_unlocked_ioctl+0xc/0x528 from [<c018ad98>] do_vfs_ioctl+0x94/0x5bc
[<c018ad10>] do_vfs_ioctl+0xc/0x5bc from [<c018b33c>] sys_ioctl+0x7c/0x8c
[<c018b2cc>] sys_ioctl+0xc/0x8c from [<c000e480>] ret_fast_syscall+0x0/0x40
[<ffffffff>] from [<ffffffff>]至此，本篇已結束，如有不對的地方，歡迎您的建議與指正。同時期待您的關注，感謝您的閱讀，謝謝！
點個在看，方便您使用時快速查看！