MySQL中 8 種常見的 SQL 錯誤用法
在公眾號后臺回復：JGNB，可獲取杰哥原創的 PDF 手冊。
MySQL在2016年仍然保持強勁的數據庫流行度增長趨勢。越來越多的客戶將自己的應用建立在MySQL數據庫之上，甚至是從Oracle遷移到MySQL上來。但也存在部分客戶在使用MySQL數據庫的過程中遇到一些比如響應時間慢，CPU打滿等情況。阿里云RDS專家服務團隊幫助云上客戶解決過很多緊急問題。現將《ApsaraDB專家診斷報告》中出現的部分常見SQL問題總結如下，供大家參考。
常見SQL錯誤用法
1. LIMIT 語句
分頁查詢是最常用的場景之一，但也通常也是最容易出問題的地方。比如對于下面簡單的語句，一般DBA想到的辦法是在type, name, create_time字段上加組合索引。這樣條件排序都能有效的利用到索引，性能迅速提升。
SELECT *
FROM operation
WHERE type = 'SQLStats'
AND name = 'SlowLog'
ORDER BY create_time
LIMIT 1000, 10;
好吧，可能90%以上的DBA解決該問題就到此為止。但當 LIMIT 子句變成 “LIMIT 1000000,10” 時，程序員仍然會抱怨：我只取10條記錄為什么還是慢？
要知道數據庫也并不知道第1000000條記錄從什么地方開始，即使有索引也需要從頭計算一次。出現這種性能問題，多數情形下是程序員偷懶了。在前端數據瀏覽翻頁，或者大數據分批導出等場景下，是可以將上一頁的最大值當成參數作為查詢條件的。SQL重新設計如下：
SELECT *
FROM operation
WHERE type = 'SQLStats'
AND name = 'SlowLog'
AND create_time > '2017-03-16 14:00:00'
ORDER BY create_time limit 10;
在新設計下查詢時間基本固定，不會隨著數據量的增長而發生變化。
2. 隱式轉換
SQL語句中查詢變量和字段定義類型不匹配是另一個常見的錯誤。比如下面的語句：
mysql> explain extended SELECT *
> FROM my_balance b
> WHERE b.bpn = 14000000123
> AND b.isverified IS NULL ;
mysql> show warnings;
| Warning | 1739 | Cannot use ref access on index 'bpn' due to type or collation conversion on field 'bpn'
其中字段bpn的定義為varchar(20)，MySQL的策略是將字符串轉換為數字之后再比較。函數作用于表字段，索引失效。
上述情況可能是應用程序框架自動填入的參數，而不是程序員的原意。現在應用框架很多很繁雜，使用方便的同時也小心它可能給自己挖坑。
3. 關聯更新、刪除
雖然MySQL5.6引入了物化特性，但需要特別注意它目前僅僅針對查詢語句的優化。對于更新或刪除需要手工重寫成JOIN。
比如下面UPDATE語句，MySQL實際執行的是循環/嵌套子查詢（DEPENDENT SUBQUERY)，其執行時間可想而知。
UPDATE operation o
SET status = 'applying'
WHERE o.id IN (SELECT id
FROM (SELECT o.id,
o.status
FROM operation o
WHERE o.group = 123
AND o.status NOT IN ( 'done' )
ORDER BY o.parent,
o.id
LIMIT 1) t);
執行計劃：
+----+--------------------+-------+-------+---------------+---------+---------+-------+------+-----------------------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+--------------------+-------+-------+---------------+---------+---------+-------+------+-----------------------------------------------------+
| 1 | PRIMARY | o | index | | PRIMARY | 8 | | 24 | Using where; Using temporary |
| 2 | DEPENDENT SUBQUERY | | | | | | | | Impossible WHERE noticed after reading const tables |
| 3 | DERIVED | o | ref | idx_2,idx_5 | idx_5 | 8 | const | 1 | Using where; Using filesort |
+----+--------------------+-------+-------+---------------+---------+---------+-------+------+-----------------------------------------------------+
重寫為JOIN之后，子查詢的選擇模式從DEPENDENT SUBQUERY變成DERIVED,執行速度大大加快，從7秒降低到2毫秒。
UPDATE operation o
JOIN (SELECT o.id,
o.status
FROM operation o
WHERE o.group = 123
AND o.status NOT IN ( 'done' )
ORDER BY o.parent,
o.id
LIMIT 1) t
ON o.id = t.id
SET status = 'applying'
執行計劃簡化為：
+----+-------------+-------+------+---------------+-------+---------+-------+------+-----------------------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-------+------+---------------+-------+---------+-------+------+-----------------------------------------------------+
| 1 | PRIMARY | | | | | | | | Impossible WHERE noticed after reading const tables |
| 2 | DERIVED | o | ref | idx_2,idx_5 | idx_5 | 8 | const | 1 | Using where; Using filesort |
+----+-------------+-------+------+---------------+-------+---------+-------+------+-----------------------------------------------------+
4. 混合排序
MySQL不能利用索引進行混合排序。但在某些場景，還是有機會使用特殊方法提升性能的。
SELECT *
FROM my_order o
INNER JOIN my_appraise a ON a.orderid = o.id
ORDER BY a.is_reply ASC,
a.appraise_time DESC
LIMIT 0, 20
執行計劃顯示為全表掃描：
+----+-------------+-------+--------+-------------+---------+---------+---------------+---------+-+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra
+----+-------------+-------+--------+-------------+---------+---------+---------------+---------+-+
| 1 | SIMPLE | a | ALL | idx_orderid | NULL | NULL | NULL | 1967647 | Using filesort |
| 1 | SIMPLE | o | eq_ref | PRIMARY | PRIMARY | 122 | a.orderid | 1 | NULL |
+----+-------------+-------+--------+---------+---------+---------+-----------------+---------+-+
由于is_reply只有0和1兩種狀態，我們按照下面的方法重寫后，執行時間從1.58秒降低到2毫秒。
SELECT *
FROM ((SELECT *
FROM my_order o
INNER JOIN my_appraise a
ON a.orderid = o.id
AND is_reply = 0
ORDER BY appraise_time DESC
LIMIT 0, 20)
UNION ALL
(SELECT *
FROM my_order o
INNER JOIN my_appraise a
ON a.orderid = o.id
AND is_reply = 1
ORDER BY appraise_time DESC
LIMIT 0, 20)) t
ORDER BY is_reply ASC,
appraisetime DESC
LIMIT 20;
5. EXISTS語句
MySQL對待EXISTS子句時，仍然采用嵌套子查詢的執行方式。如下面的SQL語句：
SELECT *
FROM my_neighbor n
LEFT JOIN my_neighbor_apply sra
ON n.id = sra.neighbor_id
AND sra.user_id = 'xxx'
WHERE n.topic_status < 4
AND EXISTS(SELECT 1
FROM message_info m
WHERE n.id = m.neighbor_id
AND m.inuser = 'xxx')
AND n.topic_type <> 5
執行計劃為：
+----+--------------------+-------+------+-----+------------------------------------------+---------+-------+---------+ -----+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+--------------------+-------+------+ -----+------------------------------------------+---------+-------+---------+ -----+
| 1 | PRIMARY | n | ALL | | NULL | NULL | NULL | 1086041 | Using where |
| 1 | PRIMARY | sra | ref | | idx_user_id | 123 | const | 1 | Using where |
| 2 | DEPENDENT SUBQUERY | m | ref | | idx_message_info | 122 | const | 1 | Using index condition; Using where |
+----+--------------------+-------+------+ -----+------------------------------------------+---------+-------+---------+ -----+
去掉exists更改為join，能夠避免嵌套子查詢，將執行時間從1.93秒降低為1毫秒。
SELECT *
FROM my_neighbor n
INNER JOIN message_info m
ON n.id = m.neighbor_id
AND m.inuser = 'xxx'
LEFT JOIN my_neighbor_apply sra
ON n.id = sra.neighbor_id
AND sra.user_id = 'xxx'
WHERE n.topic_status < 4
AND n.topic_type <> 5
新的執行計劃：
+----+-------------+-------+--------+ -----+------------------------------------------+---------+ -----+------+ -----+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-------+--------+ -----+------------------------------------------+---------+ -----+------+ -----+
| 1 | SIMPLE | m | ref | | idx_message_info | 122 | const | 1 | Using index condition |
| 1 | SIMPLE | n | eq_ref | | PRIMARY | 122 | ighbor_id | 1 | Using where |
| 1 | SIMPLE | sra | ref | | idx_user_id | 123 | const | 1 | Using where |
+----+-------------+-------+--------+ -----+------------------------------------------+---------+ -----+------+ -----+
6. 條件下推
外部查詢條件不能夠下推到復雜的視圖或子查詢的情況有：
聚合子查詢；
含有LIMIT的子查詢；
UNION 或UNION ALL子查詢；
輸出字段中的子查詢；
如下面的語句，從執行計劃可以看出其條件作用于聚合子查詢之后：
SELECT *
FROM (SELECT target,
Count(*)
FROM operation
GROUP BY target) t
WHERE target = 'rm-xxxx'
+----+-------------+------------+-------+---------------+-------------+---------+-------+------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+------------+-------+---------------+-------------+---------+-------+------+-------------+
| 1 | PRIMARY | <derived2> | ref | <auto_key0> | <auto_key0> | 514 | const | 2 | Using where |
| 2 | DERIVED | operation | index | idx_4 | idx_4 | 519 | NULL | 20 | Using index |
+----+-------------+------------+-------+---------------+-------------+---------+-------+------+-------------+
確定從語義上查詢條件可以直接下推后，重寫如下：
SELECT target,
Count(*)
FROM operation
WHERE target = 'rm-xxxx'
GROUP BY target
執行計劃變?yōu)椋?/p>
+----+-------------+-----------+------+---------------+-------+---------+-------+------+--------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-----------+------+---------------+-------+---------+-------+------+--------------------+
| 1 | SIMPLE | operation | ref | idx_4 | idx_4 | 514 | const | 1 | Using where; Using index |
+----+-------------+-----------+------+---------------+-------+---------+-------+------+--------------------+
關于MySQL外部條件不能下推的詳細解釋說明請參考以前文章：MySQL · 性能優化 · 條件下推到物化表
7. 提前縮小范圍
先上初始SQL語句：
SELECT *
FROM my_order o
LEFT JOIN my_userinfo u
ON o.uid = u.uid
LEFT JOIN my_productinfo p
ON o.pid = p.pid
WHERE ( o.display = 0 )
AND ( o.ostaus = 1 )
ORDER BY o.selltime DESC
LIMIT 0, 15
該SQL語句原意是：先做一系列的左連接，然后排序取前15條記錄。從執行計劃也可以看出，最后一步估算排序記錄數為90萬，時間消耗為12秒。
+----+-------------+-------+--------+---------------+---------+---------+-----------------+--------+----------------------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-------+--------+---------------+---------+---------+-----------------+--------+----------------------------------------------------+
| 1 | SIMPLE | o | ALL | NULL | NULL | NULL | NULL | 909119 | Using where; Using temporary; Using filesort |
| 1 | SIMPLE | u | eq_ref | PRIMARY | PRIMARY | 4 | o.uid | 1 | NULL |
| 1 | SIMPLE | p | ALL | PRIMARY | NULL | NULL | NULL | 6 | Using where; Using join buffer (Block Nested Loop) |
+----+-------------+-------+--------+---------------+---------+---------+-----------------+--------+----------------------------------------------------+
由于最后WHERE條件以及排序均針對最左主表，因此可以先對my_order排序提前縮小數據量再做左連接。SQL重寫后如下，執行時間縮小為1毫秒左右。
SELECT *
FROM (
SELECT *
FROM my_order o
WHERE ( o.display = 0 )
AND ( o.ostaus = 1 )
ORDER BY o.selltime DESC
LIMIT 0, 15
) o
LEFT JOIN my_userinfo u
ON o.uid = u.uid
LEFT JOIN my_productinfo p
ON o.pid = p.pid
ORDER BY o.selltime DESC
limit 0, 15
再檢查執行計劃：子查詢物化后（select_type=DERIVED)參與JOIN。雖然估算行掃描仍然為90萬，但是利用了索引以及LIMIT 子句后，實際執行時間變得很小。
+----+-------------+------------+--------+---------------+---------+---------+-------+--------+----------------------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+------------+--------+---------------+---------+---------+-------+--------+----------------------------------------------------+
| 1 | PRIMARY | <derived2> | ALL | NULL | NULL | NULL | NULL | 15 | Using temporary; Using filesort |
| 1 | PRIMARY | u | eq_ref | PRIMARY | PRIMARY | 4 | o.uid | 1 | NULL |
| 1 | PRIMARY | p | ALL | PRIMARY | NULL | NULL | NULL | 6 | Using where; Using join buffer (Block Nested Loop) |
| 2 | DERIVED | o | index | NULL | idx_1 | 5 | NULL | 909112 | Using where |
+----+-------------+------------+--------+---------------+---------+---------+-------+--------+----------------------------------------------------+
8. 中間結果集下推
再來看下面這個已經初步優化過的例子(左連接中的主表優先作用查詢條件)：
SELECT a.*,
c.allocated
FROM (
SELECT resourceid
FROM my_distribute d
WHERE isdelete = 0
AND cusmanagercode = '1234567'
ORDER BY salecode limit 20) a
LEFT JOIN
(
SELECT resourcesid， sum(ifnull(allocation, 0) * 12345) allocated
FROM my_resources
GROUP BY resourcesid) c
ON a.resourceid = c.resourcesid
那么該語句還存在其它問題嗎？不難看出子查詢 c 是全表聚合查詢，在表數量特別大的情況下會導致整個語句的性能下降。
其實對于子查詢 c，左連接最后結果集只關心能和主表resourceid能匹配的數據。因此我們可以重寫語句如下，執行時間從原來的2秒下降到2毫秒。
SELECT a.*,
c.allocated
FROM (
SELECT resourceid
FROM my_distribute d
WHERE isdelete = 0
AND cusmanagercode = '1234567'
ORDER BY salecode limit 20) a
LEFT JOIN
(
SELECT resourcesid， sum(ifnull(allocation, 0) * 12345) allocated
FROM my_resources r,
(
SELECT resourceid
FROM my_distribute d
WHERE isdelete = 0
AND cusmanagercode = '1234567'
ORDER BY salecode limit 20) a
WHERE r.resourcesid = a.resourcesid
GROUP BY resourcesid) c
ON a.resourceid = c.resourcesid
但是子查詢 a 在我們的SQL語句中出現了多次。這種寫法不僅存在額外的開銷，還使得整個語句顯的繁雜。使用WITH語句再次重寫：
WITH a AS
(
SELECT resourceid
FROM my_distribute d
WHERE isdelete = 0
AND cusmanagercode = '1234567'
ORDER BY salecode limit 20)
SELECT a.*,
c.allocated
FROM a
LEFT JOIN
(
SELECT resourcesid， sum(ifnull(allocation, 0) * 12345) allocated
FROM my_resources r,
a
WHERE r.resourcesid = a.resourcesid
GROUP BY resourcesid) c
ON a.resourceid = c.resourcesid
AliSQL即將推出WITH語法，敬請期待。
總結
數據庫編譯器產生執行計劃，決定著SQL的實際執行方式。但是編譯器只是盡力服務，所有數據庫的編譯器都不是盡善盡美的。上述提到的多數場景，在其它數據庫中也存在性能問題。了解數據庫編譯器的特性，才能避規其短處，寫出高性能的SQL語句。
程序員在設計數據模型以及編寫SQL語句時，要把算法的思想或意識帶進來。
編寫復雜SQL語句要養成使用WITH語句的習慣。簡潔且思路清晰的SQL語句也能減小數據庫的負擔。
使用云上數據庫遇到難點（不局限于SQL問題），隨時尋求阿里云原廠專家服務的幫助。
來源：https://developer.aliyun.com/article/72501
推薦閱讀
MySQL 高級 | 用存儲過程、定時器、觸發器來解決數據分析問題
建議收藏！Python 讀取千萬級數據自動寫入 MySQL 數據庫
手把手教你在 Linux 環境下部署 Oracle 數據庫！
手把手教你在 Linux 7 環境下部署 Oracle RAC！
手把手教你 Oracle 數據庫升級！
